Re: TP5 & TP6

[Bob Harrison <ptag.dev@ukonline.co.uk>]

Hi! Rob.
You are quite right, but the nickle plate is soon going to start to peel off
anyway !!!!
Never the less  it is best to really clean the inside of the relevant bushes
with light emery cloth ,then apply a very light oil film to the TP 4 Tube.
Regards.
Bob Harrison G-PTAG

-----Original Message-----
From: forum-owner@europaclub.org.uk
Subject: Re:  TP5 & TP6


Careful folks, the torque tube is nickel plated 4130 steel and if you get
too aggressive with the "polishing" the underlying steel will be exposed.


Best regards,

Rob Housman
A070