Have I missed something here? I though the point was to polish the
bushes, not the torque tube. The bushes are stainless steel and are
going to be abraded anyway.
Regards,
Jeremy
Jeremy Davey
Europa XS monowheel 537M
-----Original Message-----
From: forum-owner@europaclub.org.uk
Subject: Re: TP5 & TP6
Hi! Rob.
You are quite right, but the nickle plate is soon going to start to peel
off
anyway !!!!
Never the less it is best to really clean the inside of the relevant
bushes
with light emery cloth ,then apply a very light oil film to the TP 4
Tube.
Regards.
Bob Harrison G-PTAG
-----Original Message-----
From: forum-owner@europaclub.org.uk
Subject: Re: TP5 & TP6
Careful folks, the torque tube is nickel plated 4130 steel and if you
get
too aggressive with the "polishing" the underlying steel will be
exposed.
Best regards,
Rob Housman
A070
|