europa-list
[Top] [All Lists]

Re: Europa-List: Sticking throttle cable, need a good fix!

Subject: Re: Europa-List: Sticking throttle cable, need a good fix!
From: Raimo Toivio <raimo.toivio@rwm.fi>
Date: Mon, 15 Jun 2009 19:12:25

I have original braided cables but NO loops.
Manual advised not to cut them but I did and made almost straight cables.
Works perfectly.

Raimo OH-XRT "Tuuli-Ilmatar"

----- Original Message ----- 
From: "Jeff B" <topglock@cox.net>
Sent: Monday, June 15, 2009 6:21 PM
Subject: Re: Europa-List: Sticking throttle cable, need a good fix!


> 
> Bob,
> 
> Solids would do the trick.  I used them when I was researching the 
> problems I was having earlier.  However, you might want to research the 
> reason for the binding.  Make sure the cable enters the housing straight 
> on and exits the same.  Make sure the pivots on the throttle arm are 
> free from binding.  No tight bends, anywhere in the run.  Flushing the 
> housing and relubricating the whole thing may help.
> 
> As for the solids vs braided, I've seen no real difference, other than 
> to help with a binding problem.  On a properly run set of cables, the 
> originals work fine...
> 
> Jeff - Baby Blue
> 
> Robert Borger wrote:
> > 
> > Fellow Europaphiles,
> > 
> > I need a recommendation for my sticking throttle problem.  I thought I 
> > had it fixed, but I flew this morning and it happened again.  Flew from 
> > Denton (KDTO) to Ironhead (T58) for landing practice.  First landing was 
> > excellent.  Taxied back for takeoff, applied full throttle and started 
> > to roll.  RPM only went to 4000.  Aborted the takeoff.  Taxied back to 
> > takeoff, held the brake, worked the throttle and was rewarded with 5780 
> > RPM.  Released the brake and took off, flew back to KDTO, landed (OK 
> > landing, bounce, power, stabilize, land right).  Went back to the hanger 
> > and pulled the upper cowl.  The port throttle cable was hanging up 
> > again.  I have posted pics on my build web site.  Starboard throttle 
> > goes to full, port only goes half way.  By working the throttle one can 
> > get full throttle on both, but that's not right.  I need a good fix for 
> > this problem.  I have heard about teflon liners and solid cables.  I'd 
> > like some feedback on what folks have found to really work and how the 
> > installation was done.
> > 
> > Thanks in advance,
> > Bob Borger
> > Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S
> > http://www.europaowners.org/N914XL
> > Aircraft Flying!
> > 3705 Lynchburg Dr.
> > Corinth, TX  76208
> > Home:  940-497-2123
> > Cel:  817-992-1117
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > ------------------------------------------------------------------------
> > 
> > 
> > Checked by AVG - www.avg.com 
> > 
> 
> 
> 
> 
> 



<Prev in Thread] Current Thread [Next in Thread>