I too did as Paul and shortened the cables for a smooth route. I also
replaced the housing with Teflon lined ones from the bike shop. Pretty
smooth.
Europa XS Mono-Wheel
Inter-cooled Rotax 914
Airmaster Prop
On Mon, Jun 15, 2009 at 10:38 PM , ivor.phillips@ntlworld.com wrote:
>
> I did exactly as Paul,
> IMHO there was way too much cable for the short run to the carbs,
> I have had no problems with the cables sticking so far,
> Ivor
> ---- Paul McAllister <paul.the.aviator@gmail.com> wrote:
>> Hi All,
>>
>> Although the manual suggests not to cut the cables, I did. I routed
>> them to
>> be as straight as possible and then cut them to lenght. I haven't
>> ever had
>> a problem with mine hanging up, although I can't definatively say
>> that this
>> is because I shortened them.
>>
>> Paul
>
|