Subject: | Re: Europa-List: Trouble fitting wing spars to cockpit module |
---|---|
From: | Ron Parigoris <rparigor@suffolk.lib.ny.us> |
Date: | Tue, 4 Feb 2003 15:42:00 |
As far as lapping goes: "IMHO. DON'T USE GRINDING PASTE. the bushes are alumimium and you'll not wash out the paste because grains of abrasive will embed in the bushes permanently." This is true with Diamond or real hard abrasive compounds. www.mcmaster.com sells some lapping stuff that starts out as a lap, then turns to polish then to nothing. I have used this sucessful lapping aluminium on Cox 020 reedvalve racing motors. also works on steel. It does not remove much before it ends its ability to cut. Ron Parigoris |
Previous by Date: | Re: Europa-List: Trouble fitting wing spars to cockpit module, craig ellison |
---|---|
Next by Date: | Re: Europa-List: Trouble fitting wing spars to cockpit module, Alexander P . de C . Kaarsberg |
Previous by Thread: | Re: Europa-List: Trouble fitting wing spars to cockpit module, craig ellison |
Next by Thread: | Re: Europa-List: Trouble fitting wing spars to cockpit module, Alexander P . de C . Kaarsberg |
Indexes: | [Date] [Thread] [Top] [All Lists] |