Hi! Hans.
IMHO. DON'T USE GRINDING PASTE. the bushes are alumimium and you'll not wash
out the paste because grains of abrasive will embed in the bushes
permanently. It sounds like you are nearly there.
Examine the spar ends with some "engineers blue" wiped into the sockets and
you'll get a witness mark left on the spar ends after rigging . Then you can
lightly relieve the offending part where it catches.
Then have a look closely at the wing close out fairings as to how tight they
are against the fuselage.
Regards
Bob Harrison G-PTAG
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]
Subject: Re: Europa-List: Trouble fitting wing spars to cockpit module
-
|