Graham,
The idea would be to have the same plies of fiberglass on the spar, but use the
existing plies that are on the root rib, buried behind the wing root fairing
and control hardware. I would have about a tapered overlap in the corner between
the spar tang and the root rib. That is my thought anyway. The only way to
get the plies on the root rib off would be to create a huge amount of work over
what is already required.
The instructions for the mod seem to be for a wing that has not yet been
installed.
I hope that I can bond the old plies with new ones and accomplish the same
thing as disassembling the entire wing!
Dave
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=411162#411162
|