Hi Simon
I had the same problem at first, but things improved greatly after I cleaned
the torque tube with acetone to remove marks left by packaging tape. Using a
little oil also helped.
John Heykoop
XS Monowheel #536
>At the moment I have reached the stage of bonding the TP5 and TP6 bushes
>into the stabilator. The problem I have is that the bushes are a very tight
>fit on the TP4 torque tube. I can't see any way that I can use the tube to
>align the bushes while the rapid epoxy cures because inserting the tube
>completely displaces the bushes in the core. What sort of fit should the
>bushes have on the torque tube?
>Simon Miles,
>Tri-gear 508
|