Hi! Frans.
Just occurred to me .....are the bellcranks of equal leg, because if not
you may have one incorrect way round giving you unequal movements?
Regards
Bob Harrison G-PTAG
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Frans
Veldman
Sent: 15 October 2008 13:37
Subject: Re: Europa-List: Aileron setup
<frans@paardnatuurlijk.nl>
Graham Singleton wrote:
> Frans
> The starboard one looks OK, so adjust the port one.
> Make sure both ailerons hit the UP stop. That is important. If one of
> them has the balance weight of the other aileron hitting the skin that
> is wrong.
But how to adjust the port one? If I allow more up movement there, the
starboard aileron will get more down movement, and exceed the maximum
allowable down movement.
Somehow I just can't get both ailerons moving the same amount. I started
twice right from the start, with finally the same results.
And I have no balance weights hitting the skin, as I don't have the skin
yet on. This is why I'm trying to get the ailerons adjusted, now I have
still easy access to all parts.
Thanks,
Frans
|