I think Tony's fuel gauge could be callibrated for any shape tank. Paul?
Graham
JR Gowing wrote:
>
> Craig
> Tony Krzyzewski's site mayh interest you if you have never looked at
> it.....
>
> Electronic Fuel gauge fitted. Builder developed modification
>
> Don't quite know what you were thinking but if I were confident in
> wiring I think this gauge would be good - IF YOUR TANK WAS A REGULAR
> SHAPE! But you don't actually see the fuel level.
>
> Anyway I must make time to go over his site myself for a good look.
>
> Best Wishes
> JR
>
> ----- Original Message ----- From: "craig bastin" <craigb@onthenet.com.au>
> To: <europa-list@matronics.com>
> Sent: Saturday, May 03, 2008 7:29 PM
> Subject: RE: Europa-List: Fuel tank - bulges and leakage.
>
>
>> <craigb@onthenet.com.au>
>>
>> Same as they run in most race cars, one problem I can see is that they
>> still
>> havnt worked out the logistics
>> of a fuel sender as far as i am aware, so you would be stuck with the
>> sight
>> glass level I guess, also from what
>> I have seen, you would be basically creating a new tank plus bladder, so
>> wouldnt the alloy tank be simpler
>> and cheaper. Other than that, it would probably be the overall best
>> option,
>> if it is a proper fuel cell, then fuel surge
>> and vapours are virtually eliminated
>>
>> craig
>>
>> -----Original Message-----
>> From: owner-europa-list-server@matronics.com
>> [mailto:owner-europa-list-server@matronics.com]On Behalf Of Robert C
>> Harrison
>> Sent: Saturday, 3 May 2008 5:53 PM
>> To: europa-list@matronics.com
>> Subject: RE: Europa-List: Fuel tank - bulges and leakage.
>>
>>
>> <ptag.dev@tiscali.co.uk>
>>
>> Hi! Ralf
>> No one has commented ? Personally I thought it a good suggestion,
>> however the connections would be a challenge ? Still it was good enough
>> for Concord.
>> Regards
>> Bob Harrison G-PTAG
>>
>> -----Original Message-----
>> From: owner-europa-list-server@matronics.com
>> [mailto:owner-europa-list-server@matronics.com] On Behalf Of Ralph K.
>> Hallett III
>> Sent: 02 May 2008 03:23
>> To: europa-list@matronics.com
>> Subject: Re: Europa-List: Fuel tank - bulges and leakage.
>>
>> <n100rh@sbcglobal.net>
>>
>> In case I missed it, has anyone suggested the option of a rubber bladder
>>
>> in the existing tank?
>>
>> Ralph
>> rk Hallett
>> Reno, NV
>>
>>
>>
>>
>>
>>
>>
>> Checked by AVG.
>> 4:34 PM
>>
>> Checked by AVG.
>> 4:34 PM
>>
>>
>>
>>
>>
>>
>>
>> --
>> Checked by AVG.
>> 4:34 PM
>>
>>
>
>
--
Graham Singleton
Tel: +441629820187
Mob: +447739582005
|