RE: Front Bearing setup

Subject:	RE: Front Bearing setup
From:	Tony Krzyzewski <tonyk@kaon.co.nz>
Date:	Wed, 15 Nov 2000 09:39:18


Despite spending hours ensuring mine was "free" I found that six months
later the controls had stiffened up. Bob Harrison's brasso technique works
wonders but you will need a replacement set of elbow joints by the time you
have finished!

Tony

<Prev in Thread]	Current Thread	[Next in Thread>
RE: Front Bearing setup, Bob . Harrison Front Bearing setup, Tony Renshaw Re: Front Bearing setup, ami mcfadyean Re: Front Bearing setup, Graham Singleton Re: Front Bearing setup, Grahamclk Re: Front Bearing setup, Paul & Liz Atkinson RE: Front Bearing setup, Bob . Harrison RE: Front Bearing setup, Tony Krzyzewski <= Re: Front Bearing setup, Tony Renshaw Re: Front Bearing setup, Brian Rauchfuss - PCD Re: Front Bearing setup, J van Heeswijk Re: Front Bearing setup, Tom & Cathy Friedland Re: Front Bearing setup, ami mcfadyean Re: Front Bearing setup, Carl Pattinson Re: Front Bearing setup, Carl Pattinson Re: Front Bearing setup, Graham Singleton Re: Front Bearing setup, Miles McCallum RE: Front Bearing setup, Roger Sheridan

Previous by Date:	RE: Front Bearing setup, Bob . Harrison
Next by Date:	List Support Site, John Cliff
Previous by Thread:	RE: Front Bearing setup, Bob . Harrison
Next by Thread:	Re: Front Bearing setup, Tony Renshaw
Indexes:	[Date] [Thread] [Top] [All Lists]