Fred,
Go to http://www.n55xs.com and check in the June 2004 logs. Everything
is there...
Jeff - Baby Blue
Fred Klein wrote:
>
> On Jun 28, 2009, at 6:38 PM, jimpuglise@comcast.net
> <mailto:jimpuglise@comcast.net> wrote:
>
>> We ran 2 inch SCAT tubing forward and used 3/4 X 4 blue foam as a
>> mold to make a 3 sided piece of tubing about 4 feet long that mates to
>> the SCAT tubing just aft of the "D" brace and runs along the ceiling
>> to the back of the overhead in the cockpit.
>
> Jim,
>
> What I'm not getting is how your 3/4 x 4 duct gets past the "top hat
> stiffeners" between the door openings shown on Fig. 1 on p. 23-1 of the
> build manual. Simply penetrating the stiffeners doesn't seem right as
> their purpose appears to be to provide structural continuity.
>
> Fred
>
>
> --
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
> believed to be clean.
>
> *
>
>
> *
>
>
> ------------------------------------------------------------------------
>
>
> Checked by AVG - www.avg.com
>
|