On 12/04/2013 02:21 PM, gtagr wrote:
> Does anyone have any advice/experience of using the Andair
> range of selectors fitted to the upper horizontal surface of the
> tunnel - just aft of the instrument panel? Not sure in particular if
> at that height (about 350mm higher than the tank outlets) it may
> cause problems - and if to overcome that, if anyone has used a remote
> selector connected by a shaft to the valve sited closer to the
> fuselage floor? Soonest replies appreciated.
I have such an Andair selector (like many others), and indeed mounted it
quite low with an extension shaft to the selector knob. I'm very happy
with the setup.
The Europa supplied fuel valve is a piece of junk if you ask me, never
installed it (like so many other supplied pieces). I got the impression
it is for the water supply in the house and never intended for fuel, let
alone for installation in an aircraft. It is heavy as well.
Frans
|