Bob &Kevin, thanks for info, I am back out to take off and exam bowl, makes a
lot of sense, for issues I'm having.
Sent from my iPad
On May 6, 2013, at 6:30 AM, Kevin Klinefelter <klinefelter.kevin@gmail.com> w
rote:
> I know that if you over-tourqe this that the little brass rods that the fl
oats ride up and down on will splay outward as the bottom of the bowl is def
ormed. You should be able to see if that's the problem.
> Kevin
>
> On May 6, 2013, at 3:07 AM, Robert Borger <rlborger@mac.com> wrote:
>
>> Jerry,
>>
>> No to both questions. I hope to be at the airport later this morning. I
'll see if Nathan is working today or when he is working so I can ask him.
>>
>> Blue skies & tailwinds,
>> Bob Borger
>> Europa XS Tri, Rotax 914, Airmaster C/S Prop.
>> Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP
>> 3705 Lynchburg Dr.
>> Corinth, TX 76208-5331
>> Cel: 817-992-1117
>> rlborger@mac.com
>>
>> On May 5, 2013, at 10:36 PM, Jerry Rehn <rehn@rockisland.com> wrote:
>>
>> Bob
>> Any idea what torque setting he used? And how he reshaped the bowls?
>>
>> Sent from my iPad
>>
>>
>>
>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
|