Mike,
FYI: I have the same prop on my 912 S Europa. No safety wire no
loctite. I remember when I bought my prop there was an article in one
of the magazines about this prop and the ingenious lock washers they
use. I now have over 150 hours on mine and every time I check the
torque it's still perfect. I suppose the next time I have it off I'll
add some thread lock but if experience is the teacher it's probably
not needed.
Regards,
Jeff R. N128LJ Gold Rush
On Jun 28, 2010, at 11:16 PM, DuaneFamly@aol.com wrote:
> Jim,
>
> Thank you for ringing my bell about instructions.....it took me
> awhile but I finally remembered where I safely filed the paperwork.
> After reading the instructions, my recollections were
> correct.....but there is no mention on any Loctite......they just
> call for the use of lock nuts and "special" lock washers. But there
> is plenty of room behind the hub, with the cowls off, to safety wire
> the six bolts for the hub mount half and then wire the six bolts for
> the hub cover in the front. But in order to do this I will have to
> order replacement bolts in order to use safety wire.
>
> Thanks for all the assistance.
>
> Mike Duane
>
>
> -----Original Message-----
> From: jimpuglise@comcast.net
> To: europa-list@matronics.com
> Sent: Mon, Jun 28, 2010 7:43 pm
> Subject: Re: Europa-List: Jabiru 3300 Prop Question
>
> Paul-
>
> This combination uses a prop extension on the engine. It is almost
> impossible to get your fingers down into it far enough to safety
> wire, so Jabiru has a procedure to use a specific brand of Locktite
> and a specified torque. The procedure and setup are outlined in the
> documentation furnished with the prop extension.
>
> Jim Puglise A-283
> ----- Original Message -----
> From: "Paul McAllister" <paul.the.aviator@gmail.com>
> To: europa-list@matronics.com
> Sent: Monday, June 28, 2010 9:07:48 PM
> Subject: Re: Europa-List: Jabiru 3300 Prop Question
>
> Hi Mike,
>
> I am not familiar with the Jab / Sensenich combination, but I can
> say that standard aviation practice is to safety wire the bolts.
>
> Cheers, Paul
>
>
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3DD
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> =
> 3D
> ======================
>
>
|