Jim,
Thank you for ringing my bell about instructions.....it took me awhile but
I finally remembered where I safely filed the paperwork. After reading th
e instructions, my recollections were correct.....but there is no mention
on any Loctite......they just call for the use of lock nuts and "special"
lock washers. But there is plenty of room behind the hub, with the cowls
off, to safety wire the six bolts for the hub mount half and then wire th
e six bolts for the hub cover in the front. But in order to do this I will
have to order replacement bolts in order to use safety wire.
Thanks for all the assistance.
Mike Duane
-----Original Message-----
From: jimpuglise@comcast.net
Sent: Mon, Jun 28, 2010 7:43 pm
Subject: Re: Europa-List: Jabiru 3300 Prop Question
Paul-
This combination uses a prop extension on the engine. It is almost imposs
ible to get your fingers down into it far enough to safety wire, so Jabiru
has a procedure to use a specific brand of Locktite and a specified torqu
e. The procedure and setup are outlined in the documentation furnished wi
th the prop extension.
Jim Puglise A-283
----- Original Message -----
From: "Paul McAllister" <paul.the.aviator@gmail.com>
Sent: Monday, June 28, 2010 9:07:48 PM
Subject: Re: Europa-List: Jabiru 3300 Prop Question
Hi Mike,
I am not familiar with the Jab / Sensenich combination, but I can say that
standard aviation practice is to safety wire the bolts.
Cheers, Paul
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D
-=3D - The Europa-List Email Forum -
-=3D Use the Matronics List Features Navigator to browse
-=3D the many List utilities such as List Un/Subscription,
-=3D Archive Search & Download, 7-Day Browse, Chat, FAQ,
-=3D Photoshare, and much much more:
-=3D
-=3D --> http://www.matronics.com/Navigator?Europa-List
-=3D
-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D
-=3D - MATRONICS WEB FORUMS -
-=3D Same great content also available via the Web Forums!
-=3D
-=3D --> http://forums.matronics.com
-=3D
-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D
-=3D - List Contribution Web Site -
-=3D Thank you for your generous support!
-=3D -Matt Dralle, List Admin.
-=3D --> http://www.matronics.com/contribution
-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D
|