without the seals the doors are sweet, nice and true, flush all round, its
only now the seal is on, that the door bulges,
its almost like the seal is too hard and is deforming the door.
craig
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of Fred Klein
Sent: Thursday, 8 May 2008 1:01 PM
Subject: Re: Europa-List: Door bulge because of seal
On Wednesday, May 7, 2008, at 18:08 US/Pacific, craig bastin wrote:
>
> Can anyone tell me if they had issues with the doors bulging because
> of the
> seals
> the doors bulge about 5mm in the middle because of the door seals.
Craig,
Both my doors bulge about 3 mm at the center of the lower edge; this is
w/o the seals or plexi.
I've yet to do a trial fit with the seals.
Bud Yerly advised use of a heat gun to reduce the bow and eliminate the
bulge, saying that proper fit before installing glass is essential,
otherwise getting proper fit WITH the glass is quite difficult.
Fred
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Checked by AVG.
5:23 PM
Checked by AVG.
5:23 PM
|