FILETIME=[977A26E0:01C57375]
Mike,
Thanks - I think (not sure yet) I am planning to get everything together and
flying and then, only if necessary fit a trim.
Will
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of
DuaneFamly@aol.com
Subject: Re: Europa-List: Setting wing incidence
Hey Will,
I'll be interested in people's response as to right or left wing. Many have
put it on the left so they can have a visual on it. But I think it should be
on the right to that the smooth portion of the trim tab raises up into the
airflow as opposed to the left wing where the linkage side of the trim tab
lowers into the airflow.
As for servo info, mine is an MAC S9 Trim System from Menzimer Aircraft for
about $180. But their website has expired so you might want to check
Aircraft
Spruce for their RAC Electric Trim Servos. They look identical. There are
also pix in the Europa Forum from those that have already done it.
Good luck.
Mike Duane A207
Redding, California
XS Conventional Gear
Installing the rudder, re enforcing the door sills,
still mulling over the trim motor installation,
and working on hanging the instrument module.
|