Hi Fred
I think you will find that the elbow is M10x1.00 for the nylon pipe the oth
er side being 1/8 BSPT x28 . The origin of these fittings along with the br
ake master cylinder was from a British Kart component supplier. Hope this h
elps.
Phil George G-EORJ mono
Sent from my Samsung device
-------- Original message --------
From: Fred Klein <fklein@orcasonline.com>
Date: 05/08/2017 04:29 (GMT+00:00)
Subject: Europa-List: Mono brake line
Mono-drivers,
The brake line connects to the puck w/ a 90 degree elbow threaded fitting;
the threads into the puck are British Standard Tapered Threads.
Can anyone tell me the size of this 90 degree elbow BST fitting=85?=85and
=85can anyone tell me the size and thread type on the other end of that elb
ow which connects to the brake line?
I ask these questions after just having ordered a stick-mounted Beringer HA
B02 hand brake lever.
Fred
|