Great news Andrew!=0AGraham=0A=0A=0A=0A=0A________________________________
=0A From: Andrew Sarangan <asarangan@gmail.com>=0ATo: Europa List <europa-l
ist@matronics.com> =0ASent: Sunday, 22 September 2013, 22:09=0ASubject: Re:
Europa-List: Spar won't come off the socket!!=0A =0A=0A=0AThanks-to ever
yone who responded. It seems the problem-was I had overestimated-my upp
er-body strength :-) I was trying to pry the wings apart by pushing on ea
ch wing root. Instead, I inserted a bottle jack horizontally with a long 2x
4, and I was able to pry the two wings apart-There was indeed some epoxy
around the bushing. It was not much, but-I guess it-was enough to cause
a significant resistance. =0A-=0A=0A=0A=0AOn Sun, Sep 22, 2013 at 3:37 P
M, Pete <peterz@zutrasoft.com> wrote:=0A=0AAlong the same lines, how about
a thin gauge SS safety wire ( if it was the side face that is glued )-Pete
-=0A>A239=0A>=0A>On Sep 22, 2013, at 3:17 PM, Alan Burrill <alanb@dpy01.c
o.uk> wrote:=0A>=0A>=0A>Is there enough clearance to slide a knife blade be
tween the spar and socket? If you sight down the pin hole when you do it yo
u might just be able to see what the problem is an maybe even cut through i
t!=0A>>=0A>>=0A>>Alan=0A>>=0A>>Sent from my iPad=0A>>=0A>>On 22 Sep 2013, a
t 19:54, Andrew Sarangan <asarangan@gmail.com> wrote:=0A>>=0A>>=0A>>I am ho
ping someone will have a great idea to solve this problem. I just finished
gluing the spar sockets, but-I am-unable to withdraw the port spar out
of the starboard socket. I-was able to get the bolts-out quite easily.
-It also doesn't look like the spar got glued to anything, because I am a
ble to rotate the-spar, and wiggle it just but it won't slide out of the
socket. What I suspect is that some flox might have-oozed into the-insi
de face-of the socket which and might be preventing the bushing from slid
ing out. I greased everything, but did not grease the inside faces of the s
ockets.--If all fails I was going-to cut the outer face of the socket
to extract the spar. Perhaps I could reglue that face back in place. Any i
deas would be appreciated.=0A>>>-=0A>>>-=0A>>>-=0A>>>-=0A>>>D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=0Aa-
List"">http://www.matronics.com/Navigator?Europa-List D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=0A//forums.matronic
s.com D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=0Aot;">http://www.matronics.com/contribution D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =0A>>D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=0Aa-List"">h
ttp://www.matronics.com/Navigator?Europa-List D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=0A//forums.matronics.com D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=0Aot;">http://www.matronics.com/contribution D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =0A>arget="_blank">http:/
/www.matronics.com/Navigator?Europa-List=0Atp://forums.matronics.com=0A_bla
====
|