Europa-List: Spar socket hole enlargement

europa-list

Europa-List: Spar socket hole enlargement

Subject:	Europa-List: Spar socket hole enlargement
From:	Andrew Sarangan <asarangan@gmail.com>
Date:	Mon, 2 Sep 2013 23:37:45


The manual says to open up the port spar socket hole to 1" on one side
only, presumably the side facing the seatback. So why not the other
side? If the sockets are non structural, it would seem odd to sandwich
its plate between the bolt head and the spar bushing. What am I
missing here?

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Europa-List: Spar socket hole enlargement, Andrew Sarangan <= Re: Europa-List: Spar socket hole enlargement, richard Re: Europa-List: Spar socket hole enlargement, Andrew Sarangan RE: Europa-List: Spar socket hole enlargement, craig RE: Europa-List: Spar socket hole enlargement, Bob Harrison

Previous by Date:	Re: Europa-List: Prop balancing, GRAHAM SINGLETON
Next by Date:	Europa-List: Re: Europas - as far as the eye can see!, Dave Disney
Previous by Thread:	Europa-List: Prop balancing, Frank Mycroft
Next by Thread:	Re: Europa-List: Spar socket hole enlargement, richard
Indexes:	[Date] [Thread] [Top] [All Lists]