I wouldn't use an easy out as the magnetic bit could fall off when you drill for
the easy out. A chisel and hammer to knock the plug round worked for mine.
Kevin
On 19 Feb 2012, at 10:08, "craig" <craigb@onthenet.com.au> wrote:
>
> You could use an Eazy_out. It requires you to drill a hole, Although, the
> correct size easy_out may fit into the hole
> Left from the allen key hole. You can normally buy a set of them for about
> $20. Its like a left handed really coarse
> Thread high tensile screw. Good quality easy-outs are tool steel, so they
> will cut into the hole, to give a really
> Good grip on the remnants of the bolt
>
> Good luck
>
> craig
>
>
>
>
>
|