Mine too ... :)
Gert
Den 19/02/2012 kl. 11.18 skrev Kevin Challis:
>
> I wouldn't use an easy out as the magnetic bit could fall off when you drill
for the easy out. A chisel and hammer to knock the plug round worked for mine.
>
> Kevin
>
>
> On 19 Feb 2012, at 10:08, "craig" <craigb@onthenet.com.au> wrote:
>
>>
>> You could use an Eazy_out. It requires you to drill a hole, Although, the
>> correct size easy_out may fit into the hole
>> Left from the allen key hole. You can normally buy a set of them for about
>> $20. Its like a left handed really coarse
>> Thread high tensile screw. Good quality easy-outs are tool steel, so they
>> will cut into the hole, to give a really
>> Good grip on the remnants of the bolt
>>
>> Good luck
>>
>> craig
>>
>>
>>
>>
>>
>
>
>
>
>
|