> The cheapest of course is to make the Europa mechanical balance which
> should be no problem
> (is it quick and easy to use during a layup?)
Roger,
I've used the standard balance design with, I believe, excellent
results. E04 will give you the proper lengths for Aeropoxy proportions.
I excercised some care in building mine to minimize friction. I find it
works like a charm.
I like the fact that I can pour out as much resin as I think I'll need
and easily match it up with the correct amount of hardener...the
balance registers to an accuracy (of say, a couple drops of hardener)
which I find astonishing.
Happy building...welcome to the list,
Fred
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
|