Andrew,
Your pix of your outrigger looks a lot like mine...you'd previously
said that the interference you've encountered keeps the flaps and
ailerons from aligning...I'm not clear as to why that is the case.
What happens when you flip the wing over?
When you do so, be sure that your wingroot template is in place and
grabbing the TE of the flap and that the outermost TE of your aileron
is aligned w/ the BOTTOM of the wingtip and clamped to hold it in
place. My hunch is when this is done, alignment will be fine and you
won't experience any interference from the outriggers.
I did my wings simultaneously as I was concerned about maintaining
symmetry...
Fred
On Wednesday, May 23, 2007, at 10:21 AM, Andrew Sarangan wrote:
> Fred
>
> Thanks for that message.
>
> Here is a pic that shows the problem area. I have checked the
> dimensions and they all appear to be correct, to within a millimeter or
> two in the worst case.
>
> Any insights you can offer would be appreciated. Thanks.
>
>
> Andrew Sarangan
> http://www.sarangan.org
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
> <IMG_2728.jpg>
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
|