Yes, I used blue foam hot glued to the side wall, shaped it with a
sander and covered with tape. Then bid, removed all and the foam from
the tube and glassed to the wall. Mine is rather flat rather than tube
shaped and should be more comfortable for the shoulders.
Tom
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of David
Glauser
Subject: RE: Europa-List: Door latch
<david.glauser@xpsystems.com>
If the stiffness comes from the bid rather than the pipe, why use a
pipe? Wrap a piece of it in plastic wrap, then cover in bid. Remove the
pipe when cured. Heck, you could cover a dowel, cardboard tube, or a
length of garden hose.
dg
-----Original Message-----
From: beecho@beecho.org [mailto:beecho@beecho.org]
Subject: RE: Europa-List: Door latch
John
Use schedule 40. It is a lot lighter. Your stiffness will come from
the bid over the pipe. Schedule 40 is heavier and still flexible.
Tom
|