I think more Americans would become club members if it was easier to pay the
membership dues. Sending in British Pounds would be difficult for most. It's
not
the money, it's the inconvenience.
Joseph J. Like
A086 Mono XS hybrid
Jabiru 3300
Nigel Charles wrote:
>
> Hi Ferg
>
> I ordered 5 feet first time around and although that was enough for 15
> aircraft it was soon used up.
>
> To make things easier for customers I have decided to buy the following to
> make up the kit:
>
> 4" steel tube
> 2 AN4 sized stiff nuts (I forget the MS number)
> 4 AN4 sized thin washers
> 2 grease nipples.
>
> All but the grease nipples are obtained from Wicks (or A/C Spruce). My local
> car accessory shop supply the grease nipples. Just choose a size with a
> common thread so a tap can easily be obtained.
>
> Reference membership. I feel it is pretty poor if builders of $50,000
> aircraft feel they cannot afford the membership of the club. The fact that
> quite a lot of the articles are European orientated says more about the lack
> of non European input. Anyway the club supports the owners in many ways
> apart from the magazine and these mods are a typical example. The committee
> feels that it is reasonable to limit these mods to members only so we would
> appreciate it if you did the same.
>
> Regards
>
> Nigel
>
> PS. Are you coming over to the UK this summer? It would be nice to meet up
> again.
>
> ----- Original Message -----
> From: "Fergus Kyle" <VE3LVO@rac.ca>
> To: <europa-list@matronics.com>
> Subject: Re: Europa-List: Fuel sight gauges + How to see any Europa factory
> mod
>
> >
> > Nigel,
> > I ordered the SS before acquiring the Club mod because there
> was
> > difficulty here in getting on the memebers only section. When I found a
> > minimum order pertained, I decided to make a bulk order and so have 4 feet
> > of same and sent out the message.
> > I presume you provide only the SS tubing (as I) but if you
> > produce more, please let me know and will duplicate your method for ease
> of
> > understanding. What I don't know is whether the colonists will want to pay
> > for a 'foreign' membership! They are pretty paranoid right now, what with
> > border people inspecting lipsticks etc. What was a whimsical faux pas is
> now
> > a fullblown xenaphobia....
> > Best regards to you both,
> > Ferg
> > ----- Original Message -----
> > From: "Nigel Charles" <nigelcharles@tiscali.co.uk>
> > To: <europa-list@matronics.com>
> > Subject: Re: Europa-List: Fuel sight gauges + How to see any Europa
> factory
> > mod
> >
> >
> > <nigelcharles@tiscali.co.uk>
> > >
> > > The outrigger mod is a Europa Club mod. Having fitted it to my
> Europa
> > as
> > > an individual mod (UK PFA approved) the PFA suggested that it was made
> > more
> > > readily available. I have twice mentioned it to the factory because it
> > needs
> > > the minimum of extra parts and they could stock it as a factory mod.
> They
> > > don't seem to be interested which is why it has become a club mod.
> Anyone
> > > wishing to make use of this mod has only to join the club and the
> details
> > > are then free. The club is there to support Europa owners so it is
> hardly
> > a
> > > big expense to sign up when we spend thousands of 's/$'s on the aircraft
> > in
> > > the first place. In the near future, as the stainless tube required for
> > part
> > > of the mod is a little difficult to obtain, I am purchasing stock to
> make
> > up
> > > kits of parts for those east of the Atlantic and I believe Fergus Kyle
> is
> > > helping out those of you on the west side. I will be placing an order
> for
> > > parts at the end of the month so anyone in Europe wishing to make use of
> > > this service should contact me by then to confirm their order.
> > >
> > > Nigel Charles
> > > Europa Club Mods Rep
> > >
> > > ----- Original Message -----
> > > From: "tom" <beecho@fix.net>
> > > To: <europa-list@matronics.com>
> > > > About moods: What about the outrigger mod?
> > > >
> > > > Tom
> > >
> > >
> >
> >
>
|