Thanks Nigel.
I already had a try with another aerial to no avail, so I wil need to have a
try with another radio, which is bringing me back to say the Icom A 200
isn't fit for purpose!
regards
Bob H G-PTAG
-----Original Message-----
From: forum-owner@europaclub.org.uk
Subject: Re: Position lights - wires after the fact
Message text written by INTERNET:forum@europaclub.org.uk
>e;- the message below...... don't supose my fin mounted strobe is
affecting
my com vertical dipole in the rudder close out and causing my problem? the
wires to the strobe travel up the leading edge whilst the co-axial travel
aft along the fin rib area.<
I have the same arrangement and mine is OK.
I would go down the route suggested of temporarily substituting the radio
and then the aerial to isolate where the problem lies.
Nigel Charles
|