>For those using SP302, this product is available in two colours : white and
>grey. Buy half of the requirement in each colour and use in turn. Should then
>avoid the necessity to use guide-colour coats provided that too many cycles of
>filling and sanding are not required, at which point the pattern may have
become
>overcomplex.
>
>Does anyone know of any lightweight primer/fillers, ie not heavily loaded with
>dense stuff like barytes (SG 4.50)? Most fillers have a load of TiO2 (SG 4.1)
>but this provides the UV blocking. I would also prefer a filler without talc
>(absorbs moisture).
Glausarit Vari prime.
>
>Has anyone tried the Superflite System III stuff?
>
>regards, no. 175
>
>
|