I would second Bryan's view on the resin pump being redundant, and you
don't even need the tables. Simply pour out a suitable amount of
hardener, multiply the figure by 4, zero the scales and pour in that
amount of resin. Couldn't be easier. Even if you are a bit bleary eyed
and overshoot the mark it is simple to add an appropriate amount more of
hardener, and I suspect the 0.1g accuracy may exceed that of the pump.
Regards, David Joyce,402
----- Original Message -----
From: BRYNALL@aol.com
Subject: Re: Introductions
Garrett
If you get an electronic scale with a zeroing feature, an epoxy pump
will be
a waste of money.
Just get an endless supply of disposable plastic cups (say, pint size)
and
prepare a chart of mixes in grams, and you have all you need for
mixing as
much as you want when you want.
Remember that there is not so much epoxy work on the XS and you soon
get
through the phase of laying up of flying surfaces. After that it is
all about
small detail lay-ups etc..
A hacksaw blade in a padsaw handle was my next most useful tool after
the
scales.
Enjoy the build.... best regards Bryan Allsop 360 BYSA
|