Will,
It is good to cleo the top on temporarily and mark any join on the top canoe
that you can prepare with ease when the top is off.
Probably done that already.
Cheers,
Tim
Tim Ward
12 Waiwetu Street
Fendalton,
Christchurch, 8052
New Zealand.
ward.t@xtra.co.nz
Ph 64 3 3515166
Mob 0210640221
> On 15/06/2014, at 9:34 am, William Daniell <wdaniell.longport@gmail.com> w
rote:
>
> Yesterday I got permission from the inspector to turn my canoe into and ai
rplane. But before i stick the top on can I ask the general wisdom for gotc
has.
>
> I have done installed pretty much everything I can,,,I think. All the tai
l assembly, the pitch containment plywood thing and the electrics. The coax
for the antenna. Installed the battery the main gear and the flap actuator
system, set the wing incidence...
>
> Anything else I should have done?
>
> I have one specific question...how tight should the pitch trim damper be? I
cant see in the manual that specifies.
>
> And anyone have any advice for the best method for sticking the top on?
>
> thanks in advance
>
> Will
>
>
>
> William Daniell
> LONGPORT
> +57 310 295 0744
>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
|