europa-list
[Top] [All Lists]

RE: Europa-List: Rudder Pedal Step Stretching

Subject: RE: Europa-List: Rudder Pedal Step Stretching
From: Bob Harrison <ptag.dev@talktalk.net>
Date: Mon, 3 Mar 2014 12:09:16

IMHO Bad idea .  I just put a piece of 1.5" "I" section aluminium across the
footwell step and it works for me and I'm 5'9" and on a long flight you will
need to practice "walking" with as much room as you can have to prevent the
onset of cramp in the legs.
Also keep your knee from being near the draught vent more cause for cramp!
After a 4hour 30 minute flight to Krems Vienna My choice was to pretend
walking like hell or choose landing along or across vineyard wires on fields
as for as the eye could see, with tears streaming down my face. Also dose up
on a good layer of Quinine tablets !
Regards
Bob H  G-PTAG 

-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Tony Renshaw
Sent: 03 March 2014 11:40
Subject: Re: Europa-List: Rudder Pedal Step Stretching

--> <tonyrenshaw268@gmail.com>

Hi Craig and co. 
I want to put 75 mm onto the shelf, bringing it aft into the footwell, to
give me a place for my heels. Is that a dumb idea because only being 5' 9"
or 175 cm, I think my legs will easily fit, and I imagine because of the
upright nature of the pedals at neutral, that it might be nice to build a
heel support. Bad idea???

TR

On 3 Mar 2014, at 10:00 pm, craig <craigb@onthenet.com.au> wrote:

> Yes tony, you can take about 75mm off, I worked out where the mounts 
> were going to be then cut it back To leave about 15mm past the end of 
> the rearmost mounts
> 
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com] On Behalf Of Tony 
> Renshaw
> Sent: Monday, March 03, 2014 12:30 PM
> To: europa-list@matronics.com
> Subject: Europa-List: Rudder Pedal Step Stretching
> 
> --> <tonyrenshaw268@gmail.com>
> 
> Gidday,
> I've heard it mentioned that to extend this step back a bit might make 
> things more comfortable. Can I get an input on what dimension is 
> recommended? I've heard about 75 mm would do it, and I will probably 
> build it into my floor mat mod that I want to do.
> Thanks. 
> Regards
> Tony Renshaw
> Sydney Aussie
> 
> 
> 
> 
> 
> 
> 
> 
> 
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> 



<Prev in Thread] Current Thread [Next in Thread>