europa-list
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

RE: Europa-List: Rivet tail interference inside CS05 torque tube

from [craig] [Permanent Link][Original]
Subject: RE: Europa-List: Rivet tail interference inside CS05 torque tube
From: craig <craigb@onthenet.com.au>
Date: Sun, 10 Jun 2012 16:46:41 

I used the rivets as per the manual TLPD 424 BS to go through the CS7 into
the CS5 tube and had no problems

With clearance of the push rod, as the rivets are on the sides allowing the
full tube height for the push rod
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: Europa-List: Re: Contact detail & Help, GRAHAM SINGLETON
Next by Date:  Re: Europa-List: RPM drop with a 914 above 100%, Robert Borger
Previous by Thread:  Re: Europa-List: Rivet tail interference inside CS05 torque tube, Andrew Sarangan
Next by Thread:  Europa-List: RPM drop with a 914 above 100%, ploucandco
Indexes:  [Date] [Thread] [Top] [All Lists]