Nev suggested foil tape over the tufnol - it sticks well and works a treat.
Regards
Trev Pond
G-LINN
Sent from my iPhone
On 21 Feb 2011, at 16:06, Frans Veldman <frans@privatepilots.nl> wrote:
>
> On 02/21/2011 03:44 PM, Bob Harrison wrote:
>> I get this problem. The very thin tufnol packing on the quick connect
>> surfaces unfortunately won't take a double layer.
>
> Ah, good to know.
>
>> I stripped off the
>> original material mixed up some very thick redux and left both mating
>> surfaces quite "proud" of finished thickness(using new tufnol) then fitted
>> and pinned the wings into place allowing the redux to cure,
>
> Ok, but during rigging it is I think quite impossible to line up the
> stick and the aileron so they mate evenly and don't push away the redux
> before the rigging is completed. I usually see the stick moving quite a
> bit during rigging. How do you solve this problem? Or is it not a
> problem at all?
>
> Thanks,
> Frans
>
>
>
>
|