One way I saw, and copied was to put a narrow lip around the inside of the
panel and then fix bolts into the lip
so they protrude through the firewall from the inside, that way the bolts
are concealed and it is easy to put nuts
on the firewall side. you can then just slide the panel in and spin a nut on
with the other hand. One thing i would
suggest is you make a cardboard template to drill the holes in both the
firewall and the panel lip or you may have
problems lining up the holes for the bolts
craig
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of rparigoris
Sent: Friday, 15 May 2009 5:02 PM
Subject: Europa-List: Any ideas how to aid instrument panel hardware
alignment?
At moment in process of mounting instrument panel.
Any ideas on how to make a ramp/guide/shelf near lower mounting to aid
installiation would be appreciated.
Thx.
Ron Parigoris
Visit - www.EuropaOwners.org
Checked by AVG - www.avg.com
17:54:00
|