Paul,
When I fitted the brake cylinder to Baby Blue, I constructed a plywood
shelf across the tunnel, at the proper height, then glassed it in. The
cylinder fits nicely on the shelf and, after removing the narrow hump,
in the center of the console, a flat plat finished out the installation,
nicely as well as provided a mount for the throttle assembly. After
returning from SNF, with my newly purchased Trio altitude hold, I found
the the shelf also provided a perfect mount for the electronic control
head... ;) I'll be happy to show you what I did, at the Rough River
gathering.
See you (and hopefully several others) then.
Jeff - Baby Blue
396 hrs
Paul McAllister wrote:
>
> Hi All,
>
> Some of you may recall from my previous postings that I intend to
> convert my mono to a tail dragger. I got the conversion kit from Bob
> Berbue about a month ago and I have decided that I will fly this
> summer and then over winter I will do the conversion.
>
> I am slowly organizing all the bits I need and I was wondering if some
> generous soul would be prepared to lend me the moulding that fits on
> the tunnel for the finger brakes, and the aluminum hardware that is
> used for mounting up the Matco master cylinders. I'd like make a
> splash copy of the moulding and return it as soon as I am finished.
>
> If anyone in the US can help me I'd appreciate it. Obviously I would
> cover any out of pocket expenses. Please contact me off forum if you
> can help.
>
> Thanks and regards, Paul
>
>
>
>
>
>
|