All 914 builders and flyers,
I attempted to do throttle calibration yesterday and also set the stops for
max power(100%) and take-off(115%). The Europa install manual for 914 says
there are detailed instructions in the Rotax install manual. I couldn;t
find any but went ahead anyway. The program page asked for idle and max
throttle settings and that was it and said the calibration was complete. My
question is how do you set the max contunuous thrattle setting? And is it
done with the computer or with RPM and engine running?
BTY I did start the engine for the first time. She caught on the first
blade and ran very smooth at 1800rpm and above. Carb bal. is next.
Thanks for any and all input.
craig ellison
A205
----- Original Message -----
From: <NevEyre@aol.com>
Subject: Re: Europa-List: Close Out Flanges
>
> Hi Jim and Heather,
> Look carefully at the foam cores, they should have been cut, for the
> closeout pieces, they may have ''fused'' themselves back on.
> Failing that, check with Andy for the length of the cores before you trim
> any more off.
> Cheers,
> Nev.
>
>
>
|