I am getting close to installing my cockpit module and I was
wondering if there are recommended things to do beyond what the manual
describes prior to installation.
>
> Thanks,
> Dave Simenauer
On the trigear, later access to the tunnel to route and secure things,
like wires, battery cables and fuel lines, will be limited! Even with
a bottom access panel -- mine is 10" x 8", and metal clad on the
inside for transponder antenna ground plane. Before installing the
module, I placed a bunch of stud mounting pads on the fuse bottom.
They're just small chunks of 1/4" wood, chamfered on the edges, to
secure an AN-3 bolt sitting on its head. Bonded and further secured
with 2 layers glass.
Thanks Fred. I was just about to post the same question.
Graham Pocock
XS Tri-g
535
|