In a message dated 1/26/2005 3:11:41 PM Central Standard Time,
sidsel.svein@oslo.online.no writes:
The template shall rest on the
Torque tube, see fig. 5 in the manual. The essential dimension
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>.
Thanks Svein. I guess that means I'll have to take those pins out and move
the TP9 drive horn over just a bit. When the trim brackets are centered per
instructions, the bolt will just all most reach the template with the TP9 in
place on the tube.
Thanks
Brian Skelly
Texas
Europa # A276 TriGear
See My build photos at:
http://www.europaowners.org/BrianS
|