Brian,
My torque tube measures 1.5 inches in Dia, the same as the template.
The template rests directly on the torque tube, see Fig. 5.
Suggestion--when mounting the TS01 and TS02 brackets use anchor nuts.
The same for the MAC trim servo. It will make removal and installation
of these parts so much easier if the need arises. (Ron Parigoris idea)
John, A230
----- Original Message -----
From: <EuropaXSA276@aol.com>
Subject: Europa-List: TST template and Trim Bellcrank.
>
> I'm trying to install the critical distance of the trim bellcrank with the
> TST template. < Page 19-4>
> The dimension given for the radius appear to be smaller that the TP4 tube
> dimension.
> That aside, I need to know if this template should be resting on the TP4
> tube
> or the TP9 drive horn. This would certainly make as difference in the
> height
> of the trim bellcrank assembly thus throwing off the gearing of the tab to
> tail plane ratio.
>
> Thanks in advance!
> Brian Skelly
> Texas
> Europa # A276 TriGear
> See My build photos at:
> http://www.europaowners.org/BrianS
>
>
>
|