All
The Oregonaero design is what I followed. I don't know if I did it exactly,
but after 2 hours of flying , I don't have any urge to get out of the plane.
The seats in "Wile E. Coyote" are the best I have ever set in !!!!
Cliff Shaw
1041 Euclid ave.
Edmonds, WA 98020
425 776 5555
----- Original Message -----
From: "Ami McFadyean" <ami@mcfadyean.freeserve.co.uk>
Subject: Re: Europa-List: Seats
<ami@mcfadyean.freeserve.co.uk>
>
> Another subtlety in seat design can be found at
>
> http://www.oregonaero.com/p19_2001.htm#drawings
>
> where a wedge of foam along the BACK edge of the seat squab makes a
> mountain of difference to long term comfort.
>
> Duncan McF.
> ----- Original Message -----
> From: "Gerry Holland" <gnholland@onetel.com>
> To: <europa-list@matronics.com>
> Subject: Re: Europa-List: Seats
>
>
> >
> > Duncan Hi!
> > >
> > >
>
http://members.eaa.org/home/homebuilders/building/interior/Carving%20Foam%20
> > > Seats.html
> >
> > Many Thanks for pointing in this direction. It was today's subject or
task
> > to consider and has expounded some good advice.
> >
> > Regards
> >
> > Gerry
> >
> > Europa 384 G-FIZY
> > Trigear with Rotax 912 and Arplast CS Prop.
> > Engine and Prop getting near to starting. Final pipework.
> > Painting completed. Just vinyl design scheme to be added.
> > Completing Wiring to Panel.
> > Includes Dynon EFIS, KMD 150, Icom A-200 and SL70 Transponder. AoA
Fitted.
> > Shoulder Width Mod completed. Heater Unit idea is firming up.
> >
> > http://www.g-fizy.com
> > +44 7808 402404
> > gnholland@onetel.com
> >
> >
>
>
|