Changed mine for teflon lined outers with Stainless inners.
Venhill Engineering and/ or Speedy Cables in the UK supplied them.
Getting the right amount of friction in the throttle box then becomes more
important, as it is assisted less by the contribution from the friction in
the cables
Getting the standard throttle box to work properly is another story.
Duncan McF.
----- Original Message -----
From: "Gerry Holland" <gnholland@onetel.com>
Subject: Europa-List: Throttle cables
>
> I have at last got my Throttle cables to work smoothly without snagging
and
> causing mismatch in action between Carbs. I've shortened cable 'outers'
and
> routed with as little bending as possible. My gut feeling is that this is
> fairly short lived success.
>
> Has anyone found a supply of better quality cables/outers giving more
> reliable and consistent action.
>
> Regards
>
> Gerry
>
> Europa 384 G-FIZY
> Trigear with Rotax 912 and Arplast CS Prop.
> Engine and Prop getting near to starting.
> Painting completed. Just vinyl design scheme to be added.
> Completing Wiring to Panel.
> Includes Dynon EFIS, KMD 150, Icom A-200 and SL70 Transponder. AoA Fitted.
> Shoulder Width Mod completed. Ideas for Heater Unit still ideas!
>
> http://www.g-fizy.com
> +44 7808 402404
> gnholland@onetel.com
>
>
|