Hi! Rob.
Are you saying that you can actually get a Goodyear tube that fits the nose
wheel? If this is so please provide details and source? I'd prefer to change
mine since I'm convinced that the original tube I have is too large when
fitted correctly , on inflation the slight oversize of tube material has to
go somewhere resulting in small folds in the walls which flex and self wear.
The UK supplier agrees that there seems to be a problem ,having done a trial
assembly , but says there is no other source. BTW out of interest to other
"listers" my a/c although it has never flown with the mono system was
constructed to take either/or system of main gear.
Regards
Bob Harrison G-PTAG
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of Rob Housman
Subject: RE: Europa-List: Trike Nose Wheel Tyre and tube.
I must have been thinking of the inner tube I bought when I chopped the
first one full of holes the first time I joined the two halves of the nose
wheel. When I found out that a Goodyear TUBE would have cost me almost as
much as a new Michelin TIRE for my car, I bought the cheap stuff.
Fortunately I learned how to mount the wheel without damaging the tube.
Best regards,
Rob Housman
Europa XS Tri-Gear A070
Airframe complete
Irvine, CA
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of Ami McFadyean
Subject: Re: Europa-List: Trike Nose Wheel Tyre and tube.
<ami@mcfadyean.freeserve.co.uk>
These ones have 'Made in Taiwan' molded in. Or am I missing your point?
Duncan McF.
----- Original Message -----
From: "Rob Housman" <RobH@hyperion-ef.com>
Subject: RE: Europa-List: Trike Nose Wheel Tyre and tube.
>
> Don't malign the Taiwanese. Those el-cheapos come from the Peoples
Republic
> of China.
>
>
> Best regards,
>
> Rob Housman
> Europa XS Tri-Gear A070
> Airframe complete
> Irvine, CA
>
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com]On Behalf Of Ami McFadyean
> To: europa-list@matronics.com
> Subject: Re: Europa-List: Trike Nose Wheel Tyre and tube.
>
> <ami@mcfadyean.freeserve.co.uk>
>
> I've had that problem (three times in a 500x5 wheels), but it wasn't a
fold
> in the tube nor obvious fretting. Probable cause was cheap, thin-walled
> Taiwanese tubes made of a not-very-recognisable type of rubber. Does
rubber
> fatigue-fail? I was also running at nominally 25 psi, but down to 20 psi.
>
>
> Duncan McF.
>
> ----- Original Message -----
> From: "R.C.Harrison" <ptag.dev@ukonline.co.uk>
> To: "Europa Matronic Circuit" <europa-list@matronics.com>
> Subject: Europa-List: Trike Nose Wheel Tyre and tube.
>
>
> <ptag.dev@ukonline.co.uk>
> >
> > Hi! All.
> > Would all concerned advise me of any incidents of nose wheel puncture
that
> > didn't show damage within the tyre wall? ie:- if an item had penetrated
> the
> > rolling diameter or wall I don't want to know. But if the tube showed
> signs
> > of self fretting on a fold or pinch let me know because I'm looking at
> > statistics of the fact.
> >
> > Regards
> > Bob Harrison G-PTAG
> >
> >
>
>
|