Dave,
There are at least two products with "LBA-Zulassung" (OK by the German aviation
authority): one resin is called "Laminierharz L20" with its appropriate
hardener,
the other is LF / L-285. Both are said to be free of any solvents or fillers.
I can buy it here in Switzerland at a specialised shop, but have no idea
about sources in the UK.
Alfred
#097 Monowheel 912S
>>> DJA727@aol.com 04/29 3:43 >>>
In a message dated 4/29/2002 6:28:05 AM Pacific Standard Time,
72016.3721@compuserve.com writes:
> It is possible that it is the particular make of epoxy that is causing the
> problem. I know of two instances where having had the allergy builders
> changed to a German make of epoxy and had no further problems.
>
>
I assume that the epoxy is suitable for the structural requirements of the
Europa? I will look into this.
thanks,
Dave
|