Raimo
The first thought I cam up with is that you might have them turned around. The
outboard end ( wing
tip ) has some washout in it and that makes it smaller. Be sure you have them
joined correct ends
together.
Cliff Shaw
Helper A131
-----Original Message-----
Subject: The lower cores of ailerons
Express-help needed!
I checked the aileron cores. Would like to make the first lay-ups tomorrow.
They say in manual page 7-1 " The cores are cut so that they mate correctly when
they are put
together with the upper surfaces on top ".
So, I put the cores on lower cases and I have the difference of the thickness
more
than 10 mm,
really.
What to do? Should I put something under the other lower case?
All three cores were packed 10.02.1999 but one was dated 16.09.1998.
Maybe this is the reason for difference.
I will be really happy if somebody gives me an advice!
Raimo 417
|