hello all,
a capacitance fuel gauge, such as westach or skysports, with a 3" diameter
sender head, will fit into the europa fuel tank from the top, clearing both
the saddle, fuel outlet and headrests, if fitted 395mm inboard of the tank
edge and 130mm from the rear of the tank. it will be quite close to the
headrest and will need a hole in the cockpit module between the headrests to
stick out through - this distance may vary as the tank is filled/emptied so a
cover over it will be needed too. you'll want access to wirelock the bolts and
occasionally have a look in the tank anyway... Only a 1 inch diameter hole is
needed in the tank itself.
chus, dave
kit 67
|