Found it, haven't a thread guage either but now I can match the bolt.
Thanks
Alan
-----Original Message-----
From: JohnJMoran@aol.com <JohnJMoran@aol.com>
<europa@avnet.co.uk>
Date: 15 February 1998 16:02
Subject: Re: Taps [was: Drills]
>
>On page 36-6 the manual calls for use of a "5mm tap" to install the ball
>fittings for the door struts. There appear to be about 9 threads in 7mm
>(eyeball approximation, I don't have a thread gauge) so my guess would be
the
>5 x 0.8 tap would is appropriate.
>
>Regards, John A044
|