Hi Jeff
Just drill a hole though the back plate and bolt on the penny washers so
they are located inside the spinner.
Pete
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Jeffrey Roberts
Sent: 28 April 2011 01:24
Subject: Europa-List: Prop Balance
HI All,
I'm going back to my original warp drive 3 blade prop in hopes of it being
smother running. As well I need to go back to the original fiberglass
spinner and backplate. I have a fellow willing to fly here to do a harmonic
balance of the prop but has shown concern of attaching the needed weights to
the fiberglass back plat / spinner. Just curious to what others have done
and how they have attached any weights needed.
Thanks in advance,
Jeff R.
N128LJ Gold Rush
P.S. Lets not forget the Rough River fly-in this years is on Labor Day
weekend. It could be time to get fired up again.
--
This message has been scanned for viruses and
dangerous content by Houxou, and is
believed to be clean.
|