Hi! All.
I'm also sorry to hear of your incident, John.
The power boat industry uses "Morse" cable for such applications. It really
"is the business"!
It is designed to push as well as pull. I could never quite understand why
it hasn't been used
on any a/c I've seen. However ,I guess I'm answering my own question, the
price is reflective of the product. But in the light of John's experiences
cheap at the price.?
Regards
Bob Harrison. G-PTAG
-----Original Message-----
From: owner-europa@post.aviators.net
Subject: Re: Throttle Cable Considerations
Hi, John. Sorry to hear about your misfortune, but thanx for posting
it. When prelim info in U.S. is published, it's often not very
informative and sometimes hint at pilot error.
The kinking of the inner cable sure seems a function of how fast you
push forward. I know one can train one's self to move it slowly, but
that won't guarantee the same reaction in an tight situation. Meaning
a fix is best?
There are Teflon-lined, (multi-strand) cable assemblies that don't
expose the inner cable, but rather are inside a tube that both
articulates and slides inside a larger one. Cannot kink. Surgery on
the fiberglass housing would be necessary, as also attach hardware
both ends. 84" long, 10/32 threaded ends, is about $32; cut it in
two, but guard against unraveling the inner cable. Some fancy work
involved, but it might be advisable? I have a Oshkosh Fly Market
sample, and they're almost zero friction, just a bit heavier than the
kinky ones we have.
Regards,
Fred F., A063
J Moran wrote:
>
> I recently had a landing accident in N44EU which was
> precipitated by power failure during a go around; N44EU, a Mark
> 1, incurred "substantial damage" (FAA assessment). I was
> fortunate to walk away with minor bruises and scratches.
>
> In analyzing the accident later, I concluded from all the
> details of the power failure that the most likely cause was that
> the throttle cables kinked within the throttle block when I
> attempted to rapidly apply full throttle, effectively locking the
> power at the existing setting.
|