Brian Rauchfuss - PCD <brauchfu@pcocd2.intel.com> wrote:
> I just kept measuring it with a pair of calipers while I was fitting it and
> doing the layup. I tried the measurements both from the center of the bolt
> and from the edge, both seem to work, but have slight uncertainties.
That's the same way I did it. Worked out pretty well. I tried a jig, but just
couldn't make myself happy with the accuracy of it, and it was always in the
way.
> BTW, while I am talking about ailerons: I measured the twist in the ailerons
> one final time before I put the ailerons away until I have wings to attach
> them to. The twist has changed since I layed them up!
Oh-oh. That's not good. I should go check ours to see if we have the same
issue.
They were dead-on before layup, so we'll see...
Chris
A159
|